ACCANTD9 Includes Only:
- 1 x Panel Antenna
- 1 x Mount
- 2 x Screws
- 2 x Anchors
- 1 x 20 ft. (6 m) Antenna Extension Cable
Use the ACCANTD9, 2.4GHz Directional Wireless Panel Antenna, to focus a wireless signal onto one specific camera in order to increase the range of transmission (clear line-of-sight between the camera and the antenna is required).
Clear line-of-sight A clear line of sight between the antenna and wireless camera is highly recommended to ensure maximum signal strength. It is important to note that concrete, trees, or other large objects can greatly reduce the strength of signal.
Directional This antenna is designed to be used with a single wireless security camera. The spread of the signal emanating from this antenna is quite narrow, which means that need to point the antenna directly at wireless camera.
Typical installations The ACCANTD9 directional wireless security camera signal booster can be installed in many different locations, such as a roof, fence, deck, or the side of house. Just make sure that Can safely drill into selected location.
To install this antenna will need to first secure the mounting plate to the location of choosing. Next, remove the rubber cap from the bottom of the antenna and connect the included Antenna Extension Cable. Then slide the antenna onto the mounting plate and run the extension cable to wireless camera's receiver.
To boost the wireless signal even further, Can add a secondary directional antenna to the wireless camera itself. Simply connect the second directional panel antenna using an SMA extension cable. A clear line-of-sight between the two directional antennas is highly recommended in order to maximize signal strength.